Baxter Carbide, Inc.
800-370-6960 support@baxtercarbide.com
Printed
Circuit Board Cutters for Radoll Designs'
Machines
We exclusively manufacture all original and replacement cutters for gold finger beveling on these machines.
Our cutters for the Bevel Master are available in this solid one piece or two piece style. Table below show the most popular styles which we stock. Specials in any angle between 30 and 180 degrees included can be made in two weeks. Ask also about edge polishing.
Bevel
Master 1pc. cutter 
030-C030-01 30 deg. per side (60 deg. included angle)
030-C045-01 45 deg. per side (90 deg. included angle)
Bevel
Master 2pc. cutter 
030-C030-02 30 deg. per side (60 deg. included angle)
030-C045-02 45 deg. per side (90 deg. included angle)
We also are the only authorized manufacturer of the original and replacement
carbide edge polishers for the Edge Mate, Edge Mate II, and Edge
Master machines.
These edge polishers are solid carbide made in one piece in both
round and vee shape. Cutters provide excellent removal of splintered fibers and
epoxy on circuit board panels. Table below shows popular styles that are
stocked. Specials also avaiable in two weeks.
Edge Mate,
Edge Mate II and Edge Master
075-C120 120
deg. included angle
075-C150 150
deg. included angle
075-365 150
deg. Light Chip .1 to .18" thick panels
Edge Mate, Edge Mate II, and
Edge Master 075-504
Rounded edge .040 to .072" thick panvee
075-505
Rounded edge .070 to .105" thick panels
REGRIND PROGRAM
Ask our sales department how you can save money and get more out
of your cutters!
